MX5 NC RX8 Front Super Knuckle Set - NC FLCA & Knuckles must be fitted together

FLCA Features:

• Fit all NC & RX8 models - (FLCA & Knuckles must be fitted together).
• Additional camber adjustment separate from factory adjustment allows optimum caster and camber settings.
• Massive wheel clearance compared to stock arms for increased steering angle.
• Widens track by at least 25mm per side - up to 100mm overall added track width at full extension.
• No trimming of chassis or bodywork is required at minimum track width (some arch rolling may be required with lower offset wheels).
• Use OEM applicable bushes - Powerflex bushes are available Below.
• Use NA NB front lower ball joints - sold separately.

Fast Road - Here & Here

Black Series - Here & Here

FSK Features:

• Fit all NC & RX8 models - (FLCA & Knuckles must be fitted together).
• Drift and Track settings are incorporated into the knuckle giving 2 options which are easily swapped between at the user's convenience.
  
• 40mm of roll centre correction eliminates bump steer giving superb control and steering input.
• Drift Setting - Massive steering angle combined with the 40mm roll centre correction makes fast, high-angle drifts precise and predictable - even for backwards entries!
• Track Setting - 40mm roll centre correction but retains factory steering geometry for improved grip driving without the increased steering ratio.
• Use OEM wheel bearings.
  
• ABS compatible.

Contents:

• 2x Front Lower Control Arms
• 2x Front Super Knuckles

Warnings:

• Extended tie rods are required when extending the track width for NC - Buy Here.
• NA NB MX5 lower ball joints are required - Not included in this kit.
  
• Fitting by an experienced mechanic is strongly recommended. Destroy Or Die are not responsible for any damage or injury caused due to incorrect fitting or assembly.
• Not for road use.