MX5 NA NB Adjustable Front Lower Control Arm Set (1xRH, 1xLH)

Features:

• Fit all Mazda MX5 Miata NA & NB models - direct bolt-on.
• Camber adjustment separate from factory bolts allowing optimum caster and camber settings.
• Massive wheel clearance for increased steering angle.
• No trimming of chassis or bodywork is required.
• Use OEM applicable bushes - Either buy your own separately or add Powerflex bushes below.

Fast Road - HERE  and HERE.

Black Series HERE  and HERE.

Contents:

• 2x Front Lower Control Arms.

Warnings:

• Bushes are sold separately.
• Widens track by 10mm per side minimum - extended tie rods are recommended if widening the track further by using ball joint positions 2 or 3.
• These FLCA will need to be installed using the outer ball joint positions or suitable wheel spacers when fitting 13" Wheels with an ET0 or higher offset.
• Fitting by an experienced mechanic is strongly recommended. Destroy Or Die are not responsible for any damage caused due to incorrect fitting or assembly.
  
• Not for road use. 

Suggested Alignment:

• Front:
• Camber -5
• Caster 5
• Toe 0
• Rear:
  
• Camber 0
• Toe 0

• Rear toe-in will make for snappier transitions, while front toe-out can aid with turn-in. However, our advice is to learn and experiment with different settings to suit the car, track, and driving style.